Abstract
BaIn 0.3 Ti 0.7 O 2.85 ( BIT07 )/ BIT07 -Ni electrolyte/anode half cell was prepared by reactive sintering for solid oxide fuel cells. The precursors were BaCO3 , In2O3 , and TiO2 for electrolyte and BaCO3 , In2O3 , TiO2 , NiO , and carbon black for anode. The bi-layers were prepared by a multilayer tape casting and co-firing method. The compositions and microstructures of the phases were studied by X-ray powder diffraction and scanning electron microscopy, respectively. The electrolytes were dense with pure perovskite phase with a thickness about 15 μm. The anodes were porous and no obvious reaction was found between NiO and the precursors of BIT07 .
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callSimilar Papers
More From: International Journal of Applied Ceramic Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
