Badanie czynników warunkujących stopień zużycia i zniszczenia zębów w mechanizmach przekładni zębatych

Abstract

Transmission gears are very widely used in the modern construction of the machine. Even though electrical transmissions are used, mainly mechanical transmissions are widely used in the machine building industry as they are independent and better than other transmissions. Distributing power between the transmission mechanisms and working units of various machines, by changing the angle of momentum by adjusting the speed of the parts, it is possible to change the type of movement, turn the mechanism on and off, and change the direction of the transmission mechanisms. One of the most widespread types of transmission technology is gear transmission. Tens of thousands of kilowatt-hours of gears can be transmitted. The advantages of gear transmission in comparison with others are their ability to maintain their reliability and long-term functioning of the teeth, high value of the working coefficient (0.90–0.99), simple construction, lack of special service, simplicity of the transmission number and compactness of dimensions. The missing aspects of these transmissions are high precision in their preparation and installation, and low noise level. The main criterion for the working ability of the closed gear transmissions is the contact endurance of the active surface of the tooth. For this reason, the main dimensions of the transmission are determined by the contact tension and by teeth bending.