Abstract
A quantitative metrology technique is required to provide quality control necessary for production-worthy through-silicon-via (TSV) etch. This paper reports on backside infrared interferometric wafer thickness sensing for highly repeatable, nondestructive, and high-throughput determination of TSV depth, unlimited by aspect ratio (AR). Selected etch depth measurements for 1-18 μm critical dimension TSVs with AR up to 28:1 are demonstrated with 3 sigma measurement repeatability of less than 50 nm. On the 5 μm×25 μm TSV etch process baseline on 300 mm wafers, lot-to-lot, run-to-run, and within wafer etch depth variations have been quantified in a production-worthy fashion. This technique has found no appreciable depth differences between dense and isolated TSVs within run, and has identified improvements in run-to-run variability when using oxide conditioning wafers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.