Background and General Applications

Abstract

Overall Design: The basic laser consists of two mirrors which are placed parallel to each other to form an optical oscillator, that is a chamber in which light travelling down the optic axis between the mirrors would oscillate back and forth between the mirrors for ever, if not prevented by some mechanism such as absorption. Between the mirrors is an active medium which is capable of amplifying the light oscillations by the mechanism of Stimulated Emission (the process after which the laser is named — Light Amplification by the Stimulated Emission of Radiation). We will return to this process in a moment. There is also some system for pumping the active medium so that it has the energy to become active. This is usually a DC or RF power supply, for gas lasers such as CO2, excimer and He/Ne lasers, or a focussed pulse of light for the Nd-YAG laser. It may, however, be a chemical reaction, as with the iodine laser. The optical arrangement is shown in Fig 1.1a,b,c. One of the two mirrors is partially transparent to allow some of the oscillating power to emerge as the operating beam. The other mirror is totally reflecting, to the best that can be achieved (99.999% or some such figure). This mirror is also usually curved to reduce the diffraction losses of the oscillating power and also to make it possible to align the mirrors without undue difficulty — this would be the case if both mirrors were flat. The design of the laser cavity hinges on the length of the cavity and the shape of these mirrors, including any others in a folded system.