Abstract
Back-contact electrodes for hybrid organic-inorganic perovskite solar cells (PSCs) eliminate the parasitic absorption losses caused by the transparent conductive electrodes that are inherent to conventional sandwich-architecture devices. However, the fabrication methods for these unconventional architectures rely heavily on expensive photolithography, which limits scalability. Herein, we present an alternative cost-effective microfabrication technique in which the conventional photolithography process is replaced by microsphere lithography in which a close-packed polystyrene microsphere monolayer acts as the patterning mask for the honeycomb-shaped electrodes. A comprehensive comparison between photolithography and microsphere lithography fabrication techniques was conducted. Using microsphere lithography, we achieve highly efficient devices having a stabilized power conversion efficiency (PCE) of 8.6%, twice the reported value using photolithography. Microsphere lithography also enabled the fabrication of the largest back-contact PSC to date, having an active area of 0.75 cm2 and a stabilized PCE of 2.44%.
Accepted Version (
Free)
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
