Back analysis of shear strength parameters of slope based on BP neural network and genetic algorithm

Abstract

AbstractEfficient and accurate acquisition of slope shear strength parameters is the key to slope stability analysis and landslide prevention engineering design. This paper establishes a back analysis method based on uniform design, artificial neural network, and genetic algorithm. It can obtain the shear strength parameters of slopes based on information such as the radius and center coordinates of the slip surface obtained from on‐site investigations. This method has been applied to engineering practice. The research results indicate that the stability of the waste dump slope is most sensitive to the response of the internal friction angle of the loose body, followed by cohesion, and least sensitive to the response of the soil volume weight. This method can effectively reduce the number of network training samples and efficiently and quickly determine the initial weights of the BP (abbreviation for back‐propagation) neural network. This method can efficiently and quickly conduct back analysis to obtain the shear strength parameters of slopes. Using the obtained shear strength parameters for slope stability calculation, the most dangerous slip surface abscissa error, ordinate error, and slip surface radius error are only 3.59%, 0.95%, and 1.83%. It is recommended to promote the back analysis method of shear strength parameters in engineering practice in the future.