Abstract
This investigation was prompted by a cable fault explosion inside a cable duct that housed a BC Hydro 15 kV underground standby feeder cable. The incident occurred in September, 1998 at a housing complex in Vancouver, British Columbia, Canada. Damage to the building vault was extensive and could very easily have resulted in severe injury or a fatality had anyone been in the immediate area of the vault. A failure analysis investigation revealed the cause of the explosion was an accumulation of combustible gases that were decomposition products of the polymeric cable components, which were liberated from the cable by a long duration high impedance fault. Several unusual circumstances had to occur concurrently to allow the explosive condition to develop. The events that led to the explosion are discussed in terms of the failure mechanism of the cable and the effects of reclosure arcing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.