Axially symmetric vibrations of fluid-filled poroelastic circular cylindrical shells

Abstract

Employing Biot's theory of wave propagation in liquid saturated porous media, axially symmetric vibrations of fluid-filled and empty poroelastic circular cylindrical shells of infinite extent are investigated for different wall-thicknesses. Let the poroelastic cylindrical shells are homogeneous and isotropic. The frequency equation of axially symmetric vibrations each for a pervious and an impervious surface is derived. Particular cases when the fluid is absent are considered both for pervious and impervious surfaces. The frequency equation of axially symmetric vibrations propagating in a fluid-filled and an empty poroelastic bore, each for a pervious and an impervious surface is derived as a limiting case when ratio of thickness to inner radius tends to infinity as the outer radius tends to infinity. Cut-off frequencies when the wavenumber is zero are obtained for fluid-filled and empty poroelastic cylindrical shells both for pervious and impervious surfaces. When the wavenumber is zero, the frequency equation of axially symmetric shear vibrations is independent of nature of surface, i.e., pervious or impervious and also it is independent of presence of fluid in the poroelastic cylindrical shell. Non-dimensional phase velocity for propagating modes is computed as a function of ratio of thickness to wavelength in absence of dissipation. These results are presented graphically for two types of poroelastic materials and then discussed. In general, the phase velocity of an empty poroelastic cylindrical shell is higher than that of a fluid-filled poroelastic cylindrical shell. The phase velocity of a fluid-filled bore is higher than that of an empty poroelastic bore. Previous results are shown as a special case of present investigation. Results of purely elastic solid are obtained.