Abstract
AbstractThis article explores the possibilities of incorporating a defected ground structure (DGS) for widening the 3 dB axial ratio beamwidth (ARBW) of a simple low-profile planar circularly polarized (CP) antenna. Two pairs of DGSs are etched symmetrically along the diagonals of the ground plane to overcome the limited 3 dB ARBW performance of a crossed-slotted circular-shaped planar CP antenna. Here, one pair of DGSs is orthogonal to another pair of DGSs. The distance between the pairs of DGSs plays a key role in enhancing the 3 dB ARBW by 40.62%. A gap of 0.18λ0 is considered between the DGSs to maintain the symmetrical electric field distribution in the substrate. It also helps to reduce orthogonal current components and provides uniformly distributed patch surface currents. These phenomena collectively help the proposed CP antenna to exhibit right-handed circular polarization radiation with the 3 dB ARBW of 186° and 188° in the E-plane and H-plane, respectively. The measured results yield impedance bandwidth (S11 ≤ −10 dB) of 2.6% (2.283–2.342 GHz), CP bandwidth of 0.9% (2.294–2.315 GHz), gain higher than 4.8 dBic, and total antenna efficiency more than 64% across the entire CP band.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Microwave and Wireless Technologies
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
