Abstract
The finite element method has been employed to study the effects of different boundary conditions on the axial buckling of multiwall carbon nanotubes (MWCNTs). Unlike previous works, both homogeneous and heterogeneous end constraints are considered for the constituent tubes of various MWCNTs comprising shell-type (i.e., the length-to-diameter ratio L/D<10), beam-type (i.e., L/D>10), and the two different types of constituent tubes. The results show that clamping the individual tubes of simply supported or free MWCNTs exerts a variety of influences on their buckling behaviors depending on the type of the MWCNTs, the position, and the number of the clamped tubes. Clamping the outermost tube can enhance the critical buckling strain up to four times of its original value and can shift the buckling modes of those MWCNTs consisting both shell- and beam-type tubes. In contrast, little difference can be observed when simply supported ends of MWCNTs are replaced by free ends or vice versa. Explicit buckling mode shapes obtained using the finite element method for various physically realistic cases have been shown in the paper.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.