Autonomous Mars Rover Design using SOLIDWORKS and User Interface development via Internet of Things

Abstract

Abstract: In this paper, an autonomous Mars Rover is designed using the software SOLIDWORKS and a mechanical model is developed with in-depth simulations to analyse the functions of the vehicle. Furthermore, a graphical user interface is also developed based on the principles of Internet of Things using Node-Red to control and monitor the rover remotely. The red planet, i.e.; Mars, has been the centre of attraction for over 2 decades now, with astrophysicists and engineers working in unison to build devices and launch shuttle programs to understand and learn about the planet and gather more intelligence. This paper proposes the detailed development of a 6-wheeled rover that could explore the terrains of Mars, featuring a stereo vision system that could provide live video coverage and a robotic arm that can facilitate investigation of the surface, in an attempt to contribute to and fulfil the human race’s mission to Mars. It employs multiple onboard sensors that can acquire necessary data pertaining to the environmental conditions and actuators that enable functionality, with the sensors and actuators integrated onto a control system based on microcontrollers and microprocessors such as Arduino and Raspberry Pi. The rover also has a provision of a payload bay in its rear which enables it to carry loads. The SOLIDWORKS tool from Dassault systèmes is used to design and model the rover and carry out static analysis and motion studies. The GUI developed in the further sections allows overall voice control for the user and makes the task of monitoring the rover a much simpler task by eliminating the complexity that rises due to multiple control platforms. Keywords: Mars Rover, Graphical User Interface (GUI), Chassis, Mastcam, Actuators, Internet of Things (IoT), Nitinol, Payload