Autonomous Ground Vehicle Path Planning in Urban Environments Using GNSS and Cellular Signals Reliability Maps: Models and Algorithms

Abstract

In this article, autonomous ground vehicle (AGV) path planning is considered. The AGV is assumed to be equipped with receivers capable of producing pseudorange measurements to overhead global navigation satellite systems (GNSS) satellites and to cellular base stations in its environment. Parameters of the cellular pseudoranges related to the transmitter clock bias are estimated in an initialization step in an open-sky environment. The AGV fuses these pseudoranges to produce an estimate about its own states. The AGV is also equipped with a three-dimensional building map of the environment. Starting from a known starting point, the AGV desires to reach a known target point by taking the shortest distance, while minimizing the AGV's position estimation error and guaranteeing that the AGV's position estimation uncertainty is below a desired threshold. Toward this objective, a so-called signal reliability map is first generated, which provides information about regions where large errors due to poor GNSS line-of-sight or cellular signal multipath are expected. The vehicle uses the signal reliability map to calculate the position mean-squared error (MSE). An analytical expression for the AGV's state estimates is derived, which is used to find an upper bound on the position bias due to multipath. An optimal path planning generation approach, which is based on Dijkstra's algorithm, is developed to optimize the AGV's path while minimizing the path length and position MSE, subject to keeping the position estimation uncertainty and position estimation bias due to multipath below desired thresholds. The path planning approach yields the optimal path together with a list of feasible paths and reliable GNSS satellites and cellular base stations to use along these paths.