Abstract
The evolution of technology has increased the rate of traffic accidents that occurs frequently causing loss of lifeand property. Therefore, the automatic traffic monitoring system gradually attracted the attention of researchers in improvingtraffic safety through the field of intelligent transport systems. In this paper, a cost-effective approach based on GSM systemfor automatic traffic incident detection is proposed. This paper provides an optimal solution to reduce the death rate by usingthe vibration sensor and GSM system; the implementation system is based on hardware (circuits) and software to build agraphical user interface (GUI) using LabView TM to process the data. Sensors are installed into the vehicles on each side ofthe vehicle. An SMS will be sent to the user after the accident. This system will assist in search and rescue vehicle involved inthe accident.
Highlights
Nodaway, the vehicle accident was increasing day by day that causes the accident deaths among citizens of our country
The project is designed via software and hardware component which shows the output of the component parameter control, GSM module, NI DAQ 6008 and the LabView programming
The proposed system will send warning message to user when the system is alerted. This will activate the vibration sensor to be triggered, LabView will send a command to GSM module to send a warning SMS to a particular person
Summary
The vehicle accident was increasing day by day that causes the accident deaths among citizens of our country It has rise the traffic hazard and road accident because of high demand in automobiles. When the accident was detecting it, information message is transmitted to police, hospital and families with the location that occur and can provide fast medical treatment to the victim of vehicle accident. This alert message is sent to the rescue group in a brief span, which will assist in saving the valuable lives [2].
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have