Automatic rainwater collecting duct

Abstract

Today conserving water has become an important issue to solve. Despite taking numerous measures, a viable solution has yet to be discovered. Everyone should be aware of the importance of adopting a water conservation plan. Many rainwater harvesting devices were common in many regions around the world in previous years. However, there is still no reliable way for collecting high-quality rainwater. Physically controlled gadgets are difficult to manipulate according to the user’s needs. So, this project was designed as automatic rainwater collecting duct. The collecting duct contains solid waste like leave and sediments which block the pathway of the water and reduce the quality of rainwater so make the automation in that duct. First of all, the duct is in the downward position by using rain sensor will detect the rain and as the output locomotive mechanism works which rotate a duct in 180-degree upside and purely collect the rainwater after the rain stops the duct rotates another 180 degrees and it back to the initial position of downward, in this way the duct is out of the solid waste stagnant and the collected rainwater is in good quality. The collected water can be stored in a copper tank that is contaminated purely. It can be used for drinking after the first stage of the purification of rainwater.