Automatic GSM Arduino based Energy Meter Reading

Abstract

Abstract: The main objective of the project is to develop a GSM Aurdino based energy meter reading system and load control through GSM. Electricity department sends employees to take meter reading every month, which is an expensive and time consuming job. The proposed project provides a convenient and efficient method to avoid this problem. The electricity department and the user can get the readings of the energy meter of consumers via SMS. The loads can also be controlled by the user of this system via GSM using this project. A Controller input is effectively in GSM Based to a digital energy meter that takes the reading from the energy meter and displays the same on an cell phone display. The reading of the aurdino based energy meter is also sent to the control room by GSM. This GSM can also receive commands from the Software to control the owners electrical loads. On receiving command it can switch ON/OFF the loads.