Abstract
Now a days AGC has a great roll in controlling the mismatch between generation and load in interconnected power system, to attain AGC more optimal, tuning the controller using optimization techniques is needed. In this paper PSO and DE optimization techniques are employed for dynamic frequency control analysis. For dynamic analysis, the PID gain parameters obtained through single objective optimization using PSO and DE techniques, the controls are implemented by considering 1% of change in load disturbance in area 1 only and computed with sum of absolute value of ith area control error at time t as objective function and simulation result is obtained by interfacing Matlab (.m file) with Simulink block model under study . Comparison analysis is performed between PSO-PID, without controller and DE-PID. According to the investigations, better dynamic response performance is achieved through DE-PID method than the PSO-PID technique for the measured parameters of time response transient analysis such as maximum overshoot, rise time, maximum undershoot and settling time in AGC of two area system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Innovative Technology and Exploring Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.