Abstract
An approach for automatically correcting the eccentricity of the die to the punch with a moving die in small clearance punching of die-quenched steel sheets having low ductility was developed to improve the quality of the sheared edge and tool life. Although small clearance punching has the advantage of high quality of sheared edges for high strength steel sheets, it is not easy to set the die and punch for the small clearance concentrically. This brings about deterioration of the quality of the sheared edges and failure of the tools. In automatic centring, the position of the moving die is corrected by an imbalanced force during punching. It was found that small clearance punching with automatic centring is effective for not only the improvement of surface quality of the sheared edge but also the prevention of tool failure and delayed fracture in cold punching of die-quenched steel sheets having 1500MPa in tensile strength.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
