Automated Vehicle Accident Reporting and Air Pollution Detection with Advance Tracking System

Abstract

Abstract This project is designed to inform about an accident that is occurred to a vehicle to the family members of the traveling persons. This uses a vibration sensor which can detect the abrupt vibration when an accident is occurred. A buzzer alert system will also be given. This sends a signal to microcontroller. This Project is designed with an automatic vehicle accident alert system using GPS and GSM modems. The system can be interconnected with the car and alert the owner on his mobile phone. GPS Receiver gets the location information from satellites in the form of latitude and longitude. SMS sent to the pre-defined mobile number can be checked in an android application to get the location name directly instead of values. In case of accident then the vehicle should stop and immediately the information will be available in the webserver using IoT module connected to the controller. smoke sensor is also used to detect the pollution caused from the vehicle in that case also the car stops and the location details will be sent to the predefined mobile numbers and then IoT module will update the information. This is an autonomous vehicle which is driven by itself using obstacle sensor to avoid damage. A temperature sensor is also interfaced to detect the raise in temperature so that controller will intimate with a buzzer alert and the updated through IoT module. Keywords: Global positioning system (GPS),The Global system for mobile communication (GSM),Vibration sensors, smoke sensors, temperature sensors, ARM7TDMI processor, internet of things(IoT). Cite this Article Uttreshwar Gadade, Harale A.D., Kadu P.S. Automated Vehicle Accident Reporting and Air Pollution Detection with Advance Tracking System. Journal of Telecommunication, Switching Systems and Networks . 2020; 7(2): 7–18p.