Abstract
An injection method has been adapted for the determination of copper concentration in untreated, undiluted serum by flame atomic absorption spectroscopy. Serum, 50 or 100 microliter, is automatically injected by a commercial microprobe system into a plastic cone connected to the capillary tube of the burner, at a rate of 240 samples per hour. The required sample volume is considerably decreased, and sensitivity is increased 20- to 40-fold. After 500 measurements we observed no memory effects, carryover, or clogging of the burner. We discuss common difficulties with calibration standards due to viscosity and other physicochemical interferences, and suggest the use of pooled human serum as a secondary standard. Within-run CV was 1.8%, the day-to-day CV 2.2%. Comparison with a dilution method gave a correlation coefficient exceeding 0.98.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
