Abstract

For meeting the demands of cost and size for micronavigation system, a combined attitude determination approach with sensor fusion algorithm and intelligent Kalman filter (IKF) on low cost Micro-Electro-Mechanical System (MEMS) gyroscope, accelerometer, and magnetometer and single antenna Global Positioning System (GPS) is proposed. The effective calibration method is performed to compensate the effect of errors in low cost MEMS Inertial Measurement Unit (IMU). The different control strategies fusing the MEMS multisensors are designed. The yaw angle fusing gyroscope, accelerometer, and magnetometer algorithm is estimated accurately under GPS failure and unavailable sideslip situations. For resolving robust control and characters of the uncertain noise statistics influence, the high gain scale of IKF is adjusted by fuzzy controller in the transition process and steady state to achieve faster convergence and accurate estimation. The experiments comparing different MEMS sensors and fusion algorithms are implemented to verify the validity of the proposed approach.

Highlights

  • Attitude estimation is essential information for control of micronavigation system, such as Micro Autonomous Vehicle, Micro Aerial Vehicle (MAV), and Guided Munition Shell [1,2,3,4]

  • The prototype of navigation system in our lab, which was composed of DSP/FPGA microcontroller, power module, and Micro-Electro-Mechanical System (MEMS) Inertial Measurement Unit (IMU), was developed

  • The FPGA controller is responsible for data resolution, processing of a single antenna Global Positioning System (GPS) receiver, and MEMS IMU

Read more

Summary

Introduction

Attitude estimation is essential information for control of micronavigation system, such as Micro Autonomous Vehicle, Micro Aerial Vehicle (MAV), and Guided Munition Shell [1,2,3,4]. In these specific applications, the size and cost are limited. The errors of MEMS sensors will lead to a great impact on the calculation performance and reduce the estimation accuracy significantly [5, 6]. The effective calibration and error compensation method is essential to evaluate and improve the performance of MEMS IMU before attitude estimation [7,8,9]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call