Abstract

PurposeThe purpose of this paper is to employ an extended Kalman filter for implementing an AHRS (attitude and heading reference system) with acceleration compensation, thereby improving the reliability of such systems, since this removes the usual restrictive assumption that the vehicle is undergoing a non‐accelerated maneuver.Design/methodology/approachMARG (magnetic, acceleration and rate gyros) sensors constitute the basic hardware, which are integrated by the Kalman filter. The error dynamics for attitude and gyro biases is obtained in the navigation frame, providing a much simpler approach than usually taken in the literature, since it relies on direct quaternion differentiation. The state vector associated to the error dynamics possesses six components: three are associated to the quaternion error and three concern gyro bias estimates.FindingsThe AHRS is implemented in an ARM (Advanced RISC Machine) processor and tested with experimental data. The accelerated case is treated by two complementary approaches: by changing the noise variance in the Kalman filter, and by obtaining an acceleration information from GPS (global positioning system) velocity measurements. Experimental results are presented and the performance is compared with commercial ARHS systems.Practical implicationsThe proposed AHRS can be implemented with low cost MARG sensors, and GPS aiding, with use for instance in UAV (unmanned aerial vehicle) and small aircrafts' attitude estimation, for navigation and control applications.Originality/valueUsually the AHRS designs employ as states total gyro bias and Euler angles, or quaternion, and do not consider the accelerated case. Here the state is comprised by gyro bias and quaternion error variables, which attenuates the effect of nonlinearities, and two complementary procedures tackle the accelerated case: acceleration correction by using a GPS derived acceleration signal and change in the output noise covariance used by the Kalman filter.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call