Atomization Model in Port Fuel Injection Spray for Numerical Simulation

Abstract

<div class="section abstract"><div class="htmlview paragraph">Computational Fluid Dynamics (CFD) simulation is widely used in the development and validation of automotive engine performance. In engine simulation, spray breakup submodels are important because spray atomization has a significant influence on mixture formation and the combustion process. However, no breakup models have been developed for the fuel spray with plate-type multi-hole nozzle installed in port fuel injection spark ignition (SI) engines. Therefore, the purpose of this study is to simulate spray formation in port fuel injection precisely. The authors proposed the heterogeneous sheet breakup model for gasoline spray injected from plate type multi-hole nozzle. The novel breakup model was developed by clarifying the phenomenological mechanism of the spray atomization process. In this paper, this model was improved in dispersion characteristics and evaluated by the comparison of the model calculation results with experimental data. As the results, the heterogeneous sheet breakup model can describe accurately spray atomization feature of the spray injected from the plate type multi- hole nozzle in port fuel injection condition.</div></div>