Abstract
Atmospheric cold plasma jets with various configurations have drawn intense interests in diverse applications, such as surface modification and endoscopic applications. In this paper, a long and ultra-flexible micro-sized cold plasma jet generator is presented and its characteristics are analyzed. The generator mainly consists of two concentric silicone tubes with the inner one acting as the gas channel and the outer one acting as insulating layer of heat and high voltage. Gold thin film was sputtered on the circular surface of inner tube to work as the electrode as well as separation layer of ultraviolet radiation. Electrical, optical and thermal characteristics of this generator were investigated. Cold microplasma jet can be generated and ejected to the ambient air with the length varied from 0.1 m to 2.5 m, and it can impact on the finger without electric and heat sensation. Optical emission spectra analysis indicated that reactive species like OH and O atoms were generated in the plasma. This device exhibits ultra-flexible property which can be arbitrarily bent and plugged into complex and deep environment. Localized internal surface modification of polyvinyl chloride tube using this microplasma jet was also demonstrated and the result showed that surface wettability can be greatly improved after plasma treatment. This generator shows great potential for internal surface processing, plasma endoscopic and maskless lithography applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.