Abstract
Conventional cochlear implants using periodic sampling are power consuming and incapable of capturing the amplitude and phase of the input acoustic signal simultaneously. This paper presents an asynchronous event-driven encoder chip for cochlear implants capable of extracting the temporal fine structure. The chip architecture is based on asynchronous delta modulation (ADM) where the signal peak/trough crossing events are captured and digitized intrinsically, which has the advantages of significantly reduced power consumption, reduced circuit area, and the elimination of dedicated data compression circuitry. An 8-channel prototype chip was fabricated in 0.18 μm 1P6M CMOS process, occupying an area of 0.125 × 1.7 mm2 and has a power consumption of 36.2 μW from a 0.6V supply. A 16-channel stimulation encoding system was built by integrating two test chips, capable of processing the entire audible frequency range from 100 Hz to 10 kHz. Experimental characterization using the human voice is provided to corroborate functionality in the application environment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE transactions on biomedical circuits and systems
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
