Asymmetrical Load Modulated Balanced Amplifier With Continuum of Modulation Ratio and Dual-Octave Bandwidth

Abstract

This article presents a new load-modulation power amplifier (PA) architecture-asymmetrical load-modulated balanced amplifier (ALMBA). It is for the first time discovered that the control amplifier (CA) of LMBA can be designed with arbitrary load modulation (LM) ratio by offsetting the symmetry of two sub-amplifiers (BA1 and BA2) in the balanced topology. The rigorous analytical derivation reveals a unification of the quadrature-coupler-based LM PA theory, which inclusively covers the recently reported LMBA within this generalized framework. Through pseudo-Doherty (PD) biasing of the asymmetric BA1 & BA2 (peaking) and the CA (carrier) combined with proper amplitude and phase controls, the optimal LM behaviors of three amplifiers can be achieved independently overextended power back-off range and ultrawide RF bandwidth. Importantly, the LM of CA effectively mitigates the over-driving issue imposed on symmetrical PD-LMBA, leading to enhanced overall reliability and linearity. Based on the proposed theory, an RF-input PD-ALMBA is designed and implemented using commercial GaN transistors. The developed prototype experimentally demonstrates dual-octave bandwidth from 0.55 to 2.2 GHz, which is the widest bandwidth ever reported for load-modulation PAs. The measurement exhibits an efficiency of 49-82% for peak output power and 40-64% for 10-dB OBO within the design bandwidth. When stimulated by a 20-MHz long-term evolution (LTE) signal with 10.5-dB peak to average power ratio (PAPR), an average efficiency of 47-63% is measured over the entire bandwidth at an average output power around 33 dBm.