Abstract

AMIGO is a first-generation Astrodynamical Middle-frequency Interferometric Gravitational Wave (GW) Observatory. The scientific goals of AMIGO are to bridge the spectra gap between first-generation high-frequency and low-frequency GW sensitivities: to detect intermediate mass BH coalescence; to detect inspiral phase and predict time of binary black hole coalescences together with binary neutron star & black hole-neutron star coalescences for ground interferometers; to detect compact binary inspirals for studying stellar evolution and galactic population. The mission concept is to use time delay interferometry (TDI) for a nearly triangular formation of three drag-free spacecraft with nominal arm length 10,000 km, emitting laser power 2–10 W and telescope diameter 300–500 mm. The design GW sensitivity in the middle frequency band is [Formula: see text] Hz[Formula: see text]. Both geocentric and heliocentric orbit formations are considered. All options have LISA-like formations, that is, the triangular formation is [Formula: see text] inclined to the orbit plane. For all solar orbit options of AMIGO, the first-generation TDI satisfies the laser frequency-noise suppression requirement. We also investigate for each option of orbits under study, whether constant equal-arm implementation is feasible. For the solar-orbit options, the acceleration to maintain the formation can be designed to be less than 15 nm/s2with the thruster requirement in the 15 [Formula: see text]N range. AMIGO would be a good place to test the feasibility of the constant equal-arm option. Fuel requirement, thruster noise requirement and test mass acceleration actuation requirement are briefly considered. From the orbit study, the solar orbit option is the mission orbit preference. We study the deployment for this orbit option. After a last-stage launch from 300 km Low Earth Orbit (LEO), each S/C’s maneuver to an appropriate 2-degree-behind-the-Earth AMIGO formation in 95 days requires only a [Formula: see text]v of about 80 m/s.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.