Assisted Tea Leaf Picking: The Design and Simulation of a 6-DOF Stewart Parallel Lifting Platform

Abstract

The 6-DOF Stewart parallel elevation platform serves as the platform for mounting the tea-picking robotic arm, significantly impacting the operational scope, velocity, and harvesting precision of the robotic arm. Utilizing the Stewart setup, a parallel elevation platform with automated lifting and leveling capabilities was devised, ensuring precise halts at designated elevations for seamless harvesting operations. The effectiveness of the platform parameter configuration and the reasonableness of the posture changes were verified. Firstly, the planting mode and growth characteristics of Yunnan large-leaf tea trees were analyzed to determine the preset path, posture changes, and mechanism stroke of the Stewart parallel lifting platform, thereby determining the basic design specifications of the platform. Secondly, a 3D model was established using SolidWorks, a robust adaptive PD control model was built using MATLAB for simulation, and dynamic calculations were carried out through data interaction in Simulink and ADAMS. Finally, the rationality of the lifting platform design requirements was determined based on simulation data, a 6-DOF Stewart parallel lifting platform was manufactured, and a motion control system was built for experimental verification according to the design specifications and simulation data. The results showed that the maximum deviation angle around the X, Y, and Z axes was 10°, the maximum lifting distance was 15 cm, the maximum load capacity was 60 kg, the platform response error was within ±0.1 mm, and the stable motion characteristics reached below the millimeter level, which can meet the requirements of automated operation of the auxiliary picking robotic arm.