Assessment of voltage instrument transformers accuracy for harmonic measurements in transmission systems

Abstract

The measurement of harmonic and interharmonic voltages up to 2.5 kHz is an inherent part of the Power Quality assessment in electrical networks. In the past the monitoring of harmonic voltages has been of minor importance for many transmission system operators (TSO). As the number of power electronics connected to the transmission grid (e.g. self-commutating HVDC stations or converters in large wind power plants) increases continuously, the concern of TSOs regarding the harmonic levels grows as well. This is also confirmed by the recent significant increase of installed Power Quality monitors in transmission grids. In many cases the traditional voltage instrument transformers (VT), which are only designed to have a high accuracy at rated frequency, are used for voltage harmonic measurements. This questions the accuracy of the harmonic measurements and the reliability of any compliance assessment (e.g. against existing planning levels). The paper illustrates the challenges of harmonic voltage measurements from the viewpoint of the TSO. After a quick description of the initial situation the paper discusses two methodologies to measure the frequency response characteristic of VTs. The methods are applied to 10 VTs of two TSOs and the results are discussed with regard to the suitability of the VTs for voltage harmonic measurements.