Abstract
Cyperus laevigatus grows in natural and constructed wetland ecosystems built for domestic effluents treatment. The use of unmodified shoots of C. laevigatus as a wetland bio-waste for cadmium (Cd) removal from aqueous solutions was assessed. Batch adsorption experiments were conducted to investigate effects of pH, contact time, adsorbent dose, and Cd concentration at an ionic strength of 0.01moll−1 NaNO3 on adsorption efficiency and capacity. Adsorption is strongly affected by solution pH, and the optimum pH is 5.5. The equilibrium was established within a maximum of 120min. Cd removal increased to 65.4% with decreasing the adsorbent dose from 30 to 5gl−1. Equilibrium adsorption capacity increased from 0.70 to 4.73mgg−1 as initial Cd concentration increased from 5 to 50mgl−1 whereas Cd removal decreased from 70% to 47.3%, respectively. Freundlich isotherm best described the equilibrium data compared to the Langmuir isotherm (R2 0.997 and 0.892, respectively). The monolayer adsorption capacity was 7.49mgg−1. Cd adsorption kinetic onto C. laevigatus obeyed the pseudo-second-order kinetic model indicating that chemisorption is the rate-limiting step. Unmodified shoots of C. laevigatus, as a costless bio-waste and environmentally friendly biosorbent, could be used for treating Cd-contaminated water systems.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
