Assessment of the Environmental Impact of Solid Oil Materials Based on Pyrolysis Oil.

Abstract

One method of managing used car tires is decomposition by thermochemical conversion methods. By conducting the process at temperatures of 450-750 °C, three fractions are obtained from tires: oil, gas, and solid. The liquid product of the pyrolysis of used car tires is pyrolysis oil, which consists of aromatic, polyaromatic, and aliphatic hydrocarbons. Unconventional building materials were obtained from tire pyrolysis oil and the environmental impact was evaluated. Blocks made from pyrolysis oil showed mechanical strength of up to about 1700 N. No heavy metals or polycyclic aromatic hydrocarbons, which were found in the crude heavy-PO fraction, were detected in the filtrates after incubation of the block obtained from the heavy-PO fraction at 240 °C. The highest inhibition of Sorghum saccharatum shoot (74.4%) and root (57.5%) growth was observed for solid materials from the medium-PO fraction obtained at 240 °C. The most favorable values of the parameters for the process of obtaining blocks based on post-PO were an annealing temperature of 180 °C, time of 20 h, and mass ratio of catalyst to catalyzed oil of 0.045.