Assessment of the chemical looping gasification of wheat straw pellets at the 20 kWth scale

Abstract

In this work, the Biomass Chemical Looping Gasification (BCLG) process was evaluated for syngas production at the 20 kWth scale using wheat straw pellets as the fuel feedstock and ilmenite as the oxygen carrier. The effect of different operational variables –namely the fuel reactor temperature, the mean residence time of solids in the fuel reactor, the oxygen-to-biomass ratio (controlled by the oxygen fed into the air reactor) and the gas velocity in the carbon stripper– on the process performance and the syngas yield was analyzed. Interestingly, smooth operation of the CLG unit was observed and no agglomeration issues detected. In addition, char produced during devolatilization still retained its initial pellet shape and unconverted char pellets were elutriated from the fuel reactor mixed with the finer oxygen carrier particles. Both steady-state and transition periods were evaluated to have a complete overview of the process. Transition periods were characterized by a different oxygen transfer rate in the air and fuel reactors. Steady state was reached when the oxygen transference rate was the same in both reactors. In this sense, the oxygen transference rate in the fuel reactor was the main factor affecting the syngas yield and the cold gas efficiency. Also, the temperature and mean residence time of solids in the fuel reactor showed a considerable effect on the char conversion and, consequently, on the syngas yield. However, operating conditions hardly affected the production of light hydrocarbons (CH4 and C2-C3) and tar, which were maintained roughly constant throughout the experimental campaign.