Assessment of strut forces for braced excavation in clays from numerical analysis and field measurements

Abstract

One important consideration in the design of a braced excavation system is to ensure that the structural bracing system is designed both safely and economically. The forces acting on the struts are often determined using empirical methods such as the Apparent Pressure Diagram (APD) method developed by Peck (1969). Most of these empirical methods that were developed from either numerical analysis or field studies have been for excavations with flexible wall types such as sheetpile walls. There have been only limited studies on the excavation performance for stiffer wall systems such as diaphragm walls and bored piles. In this paper, both 2D and 3D finite element analyses were carried out to study the forces acting on the struts for braced excavations in clays, with focus on the performance for the stiffer wall systems. Subsequently, based on this numerical study as well as field measurements from a number of reported case histories, empirical charts have been proposed for determining strut loads for excavations in stiff wall systems.