Assessment of schwertmannite, jarosite and goethite as adsorbents for efficient adsorption of phenanthrene in water and the regeneration of spent adsorbents by heterogeneous fenton-like reaction.

Abstract

Schwertmannite, jarosite or goethite are commonly used to remove metals and/or metalloids from contaminated water via adsorption processes, but it is still unclear whether they can be used as adsorbents to remove hydrophobic organic pollutants (HOCs), such as polycyclic aromatic hydrocarbons (PAHs), from groundwater or wastewater. Here, the feasibility of using these iron (oxyhydr) oxide minerals as adsorbents for phenanthrene (a model PAH) adsorption and regenerating the spent adsorbents via heterogeneous Fenton-like reaction was investigated. Results showed that they exhibited rapid adsorption rates and considerable adsorption capacities for phenanthrene. The maximum Langmuir capacities (Qmax) for phenanthrene adsorption at 28°C were in an ascending order of goethite (567μg·g-1)<schwertmannite (727μg·g-1)<jarosite (2088μg·g-1). The adsorption process was a spontaneous and exothermic process along with the decrease of randomness at the solid/liquid interfaces, which was influenced by temperature, adsorbent dosage, and the coexistence of inorganic anions. Both schwertmannite and jarosite were superior to goethite in light of their easy separation from the bulk solution after the adsorption processes. A multi-cycle experiment demonstrated that the regeneration efficiency of schwertmannite (97.9-99.7%) was much higher than that of jarosite (80.1-87.2%), and the mineral structure, morphology and functional groups of schwertmannite were not changed during the successive adsorption-regeneration processes. Therefore, among the investigated three iron (oxyhydr) oxide minerals, schwertmannite was an attractive and regenerable adsorbent for the removal of phenanthrene from water owing to its high adsorption capacity, good separation ability, and excellent reusability.