Abstract
Assessment of random and systematic error is done on the real part of permittivity (/spl epsi/') and loss tangent tan /spl delta/) of ceramics and polymers such as alumina, polyethylene, polypropylene, Teflon and TPX at millimeter wave frequencies by comparing four different measurement systems namely the open resonator system (using both the cavity length and the frequency variation techniques), the Dispersive Fourier Transform Spectroscopy (DFTS), the W-band spectrometer with Backward Wave Oscillator (BWO) and the broadband free-space measurement system. The data obtained from DFTS and W-band spectrometer were also compared over W-band frequencies (68-118 GHz) by generating /spl epsi/' and tan /spl delta/ plots of acrylic, fiberglass resin and nylon. Systematic error assessment of the data shows excellent agreement for /spl epsi/' of the specimens measured by the four systems. It is observed that /spl epsi/' of the specimens measured with DFTS and broadband free-space measurement system agree well with a standard deviation as highest as 0.009.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.