Abstract

The aim of this study was to evaluate new working conditions in the construction industry in Estonia. Three construction sites were investigated: a dwelling house at the stage of renovation, a warehouse at the stage of excavation and preparation work, and a hotel, where we examined the working conditions of the finishers. Microclimate: air temperature, relative humidity and air velocity were determined at every workplace. Full-shift personal exposure measurements of dust and gas exposure were performed among 97 construction workers in breathing zone air. The concentration of lead in the air was analysed by AAS. Vapours of benzene, styrene and toluene concentrations were determined by gas chromatography. The noise level was measured with the help of the sound-level meter at every workplace. All microclimatic indices were sometimes below or above exposure standards for indoor work. High levels of airborne dust and increased concentrations of lead were observed during repair work. Low concentrations of organic solvents in the air were determined when using paints and some synthetic substances. The noise level exceeded the permitted limit when an excavator and powerful electric appliances were used. A questionnaire determined the prevalence of subjectively experienced musculoskeletal strain in 30% of workers. The working conditions in the construction industry in Estonia are approaching European level. However, it is necessary to improve working conditions permanently by the use of new harmless materials, personal protective equipment, and through influencing worker health by permanent education and medical watch. We consider that questionnaires are very important in the control of the work environment, in subjective health assessments, and as a source of useful proposals to improve working conditions.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.