Assessment of plastic heterogeneity in grain interaction models using crystal plasticity finite element method

Abstract

Micromechanical models aimed at simulating deformation textures and resulting plastic anisotropy need to incorporate local plastic strain heterogeneities arising from grain interactions for better predictions. The ALAMEL model [Van Houtte, P., Li, S., Seefeldt, M., Delannay, L. 2005. Deformation texture prediction: from the Taylor model to the advanced Lamel model. Int. J. Plasticity 21, 589–624], is one of the models in which the heterogeneous nature of plastic deformation in metals is introduced by accounting for the influence of a grain boundary on the cooperative deformation of adjacent grains. This is achieved by assuming that neighbouring grains undergo heterogeneous shear rates parallel to the grain boundary. The present article focuses on understanding the plastic deformation fields near the grain boundaries and the influence of grain interaction on intra-grain deformations. Crystal Plasticity Finite Element Method (CPFEM) is employed on a periodic unit cell consisting of four grains discretised into a large number of elements. A refined study of the local variation of strain rates, both along and perpendicular to the grain boundaries permits an assessment of the assumptions made in the ALAMEL model. It is shown that the ALAMEL model imbibes the nature of plastic deformation at the grain boundaries very well. However, near triple junctions, the influence of a third grain induces severe oscillations of the stress tensor, reflecting a singularity. According to CPFEM, such singularity can lead to grain subdivision by the formation of new boundaries originating at the triple junction.