Abstract

Abstract Digital Surface Models and orthoimages at high spatial and temporal resolution and accuracy is of increasing importance for many applications. From several years ago photogrammetry-UAV is being used to produce these topographic products. The aim of this study is to analyse the influence of the number of Ground Control Points used for georeferencing on Digital Surface Model and orthoimage accuracies obtained with UAV-photogrammetry. In this purpose, 160 images were taken on a 17.64 ha surface at 120 m altitude above ground level, and five replications of photogrammetric projects taking into account 4, 5, 6, 7, 8, 9, 10, 15, and 20 GCPs were made. Root Mean Square Error (RMSE) was used as accuracy measurement. Optimal results for RMSE X , RMSE Y and RMSE XY mean ± standard deviation values were reached for 15 GCPs: 3.3 ± 0.346, 3.2 ± 0.441, 4.6 ± 0.340 and 4.5 ± 0.169 cm respectively. Similar conclusions was derived for vertical accuracy: lower RMSE Z mean ± standard deviation values were reached for 15 and 20 GCPs: 5.8 ± 1.21 cm and 4.7 ± 0.860 cm respectively. In view of these results maps at 1:150 scale and contour interval of 15 cm can be obtained from UAV-photogrammetry.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.