Abstract

Although most researches with non-essential metals (NEMs) have been done with single or individual metals, in reality, organisms are often exposed to multiple contaminants at the same time through the air, food and water. In this study, we tested the toxicity of four NEMs, As, Cd, Pb, and Hg, individually and as a composite mixture using the microtox bioassay. This assay uses the reduction of bioluminescence of the bacterium Vibrio fischeri as a measure of toxicity. The concentrations of each chemical in the mixture were based on multiples of their maximum contaminant levels (MCLs) set by the U.S. EPA. The highest concentration of exposure was 20 times the MCL, which translated into 200, 100, 40 and 300 ppb for As, Cd, Hg and Pb, respectively. The ratio for the mixture from these concentrations was 10:5:2:15 for As, Cd, Hg and Pb, respectively. Among the individual metals tested, the ranking of toxicity was Hg>Pb>Cd>As based on the EC50 values of 109, 455, 508 and 768 ppb for Hg, Pb, Cd and As, respectively. The EC50 for the composite mixture was 495% MCL which translated into nominal concentrations of 49, 25, 10 and 74 ppb for As, Cd, Hg, and Pb, respectively. Overall, the EC50 value of each NEM within the mixture was lower than the EC50 of the individual chemical; an evidence of synergism for the mixture. The individual toxic units (TU) were 0.06, 0.05, 0.09, and 0.16 for As, Cd Hg, and Pb, respectively and the summed toxic unit (TU) was 0.37 (less than 1). This study provides needed scientific data necessary for carrying out complete risk assessment of As, Cd, Hg, and Pb mixtures of some priority compounds.

Highlights

  • An unlimited number of different mixtures of pollutants occur in the environment, and the number and concentration of chemicals in these mixtures are highly variable

  • We tested the toxicity of four Non-essential metals (NEMs) individually and as a composite mixture using the microtox bioassay

  • The EC50s were determined as the concentrations corresponding to 50% decrease in light output (Y = 1.0)

Read more

Summary

Introduction

An unlimited number of different mixtures of pollutants occur in the environment, and the number and concentration of chemicals in these mixtures are highly variable. Non-essential metals (NEMs) are priority pollutants that pose potential risks to human health and the environment. The microtox assay is simple in that it assesses chemical toxicity by measuring the magnitude of chemical interference with normal biological function in the bioluminescence bacteria Vibrio fischeri [1].

Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call