Abstract

Rare earth elements (REE) are frequently referred to as ingredients for enhancements in modern industry, as they are extensively applied in many industrial branches due to their accented electro-magnetic and optical properties. REE have end-utilizations as catalysts, magnets, and as dopants for ceramic materials. Rare earth minerals are scarce therefore the unconventional REE-containing resources such as waste materials and industrial byproducts are continuously being investigated. Coal combustion products comprise REE concentrations varying between 200 ppm and 1500 ppm. This quantity can be isolated though the extraction procedure. In this study, the five stages extraction was conducted on the coal combustion ash from the selected landfill site. The extractions of 32 elements (As, Ga, Ce, Be, Ge, Nd, Cr, Zr, Eu, Cu, Nb, Gd, Co, Mo, Dy, Li, Ag, W, Mn, Cd, Au, Ni, In, Hg, Pb, Sn, Tl, V, Sb, Th, Zn, and La) were conveyed. Chemical analyses were conducted via XRF, ICP-OES, ICP-MS, and AAS techniques. The complexity of the obtained data was examined by Principal component analysis and Cluster analysis in order to derive interconnections between quantity of elements and landfill characteristics, as well as mutual relationships among the elements of interest, and to assess the accomplishment of REE recovery from the coal ash.

Highlights

  • The ash generated as a by-product of the coal combustion in power-plants represents a huge ecological and financial peril

  • Rare earth elements (REE) are frequently referred to as ingredients for enhancements in modern industry, as they are extensively applied in many industrial branches due to their accented electro-magnetic and optical properties

  • Chemical analyses were conducted via X-ray fluorescence (XRF), inductively coupled plasma optical emission spectrometry (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), and atomic absorption spectroscopy (AAS) techniques

Read more

Summary

Introduction

The ash generated as a by-product of the coal combustion in power-plants represents a huge ecological and financial peril. According to the information provided by Ecoba, approximately 40 million tons of coal combustion products (CCP) are annually produced in the European Union [1]. Within the EU, the reutilization rate for fly ash in the construction industry is currently at approximately 43 %, for bottom ash around 46 %, and for boiler slag is 100 % [1, 2]. The rest of CCP ordinarily finishes its life-cycle at the waste materials depots. Lj. Miličić et al.,/Science of Sintering, 53(2021)169185

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call