Assessment of biological trickling filter systems with various packing materials for improved wastewater treatment

Abstract

Attached growth processes for wastewater treatment have significantly been improved during recent years. Their application can be extended to sustainable municipal wastewater treatment in remote locations and in developing countries for the purpose of organic matter (biochemical oxygen demand, BOD) removal and pathogenic decontamination. The aim of this study is to assess selected packing media for biological trickling filters (BTFs) and to develop a simplified model for describing the capacity of BOD removal in BTFs. In this work, BTFs with four different media viz., rubber, polystyrene, plastic and stone have been investigated at two temperature ranges of 5–15°C and 25–35°C. The average removal of both chemical oxygen demand and BOD was higher than 80 and 90% at temperature ranges of 5–15 and 25–35°C, respectively. The geometric mean of faecal coliforms in BTF using polystyrene, plastic, rubber and stone as filter media was reduced by 4.3, 4.0, 5.8 and 5.4 log10, respectively, at a low temperature range of 5–15°C. At a higher temperature range of 25–35°C, the faecal coliform count was reduced by 3.97, 5.34, 5.36 and 4.37 log10 from polystyrene, plastic, rubber and stone media BTF, respectively. Simplified model was developed and used to estimate the optimal BOD loading rates (Bvd) for designing robust BTF systems, with appropriate filter media. It has been concluded that highly efficient BTFs can be designed using various filter media, which may be capable of treating organic loading rates of more than 3 kg BOD/m3 day. These types of BTFs can be applied for the BOD and microbial contaminants removal of wastewater for potential reuse in developing countries.