Abstract

Raised Pavement Markers (RPMs) are used by a number of transportation agencies with the objective of improving roadway safety, especially in complex roadway geometries and along wet roads. Because of maintenance and cost issues, many transportation agencies are exploring alternatives to RPMs such as wet reflective pavement tape and barrier-mounted reflective delineators. In order to assess the relative potential of these devices to contribute to nighttime driving safety, the luminances of new and used RPM samples from different manufacturers and having different colors and of several alternative delineation devices were measured in the laboratory using a range of geometric conditions relevant to the driving task. From these data, Luminances under representative low-beam headlight illumination were determined and these quantities were used to estimate driver visual performance. Large variations in luminance yielded relatively small differences in visual performance for a viewing distance of 100 m, primarily because of the plateau characteristic of visual performance. Differences in threshold visibility distances were greater, with distances at identification threshold for the devices measured ranging approximately from 150 to 400 m. Used RPMs had luminances 20…30% lower than new RPMs but similar visibility characteristics as new devices. The analysis method in this study may be useful for practitioners seeking to characterize the visual effectiveness of RPMs and other roadway delineation devices and systems.

Highlights

  • Raised Pavement Markers (RPMs) are used by a number of transportation agencies with the objective of improving roadway safety

  • Because of maintenance issues and costs associated with RPMs (Bahar et al 2004), transportation agencies have investigated alternative delineation devices and systems, including wet reflective pavement marking tape and barrier-mounted reflective delineators

  • Bullough et al (2013) have shown strong correlations between Relative Visual Performance (RVP) improvements associated with roadway intersection lighting and nighttime crash reductions at intersections outfitted with lighting. These findings suggest the RVP model could have utility in assessing the visual effectiveness of RPMs and of alternatives to RPMs

Read more

Summary

Introduction

Raised Pavement Markers (RPMs) are used by a number of transportation agencies with the objective of improving roadway safety. When roadway curvature impairs the visibility of conventional pavement markings, RPMs are thought to provide additional visual guidance that can provide drivers with extended preview time about the roadway geometry, lane width and other visual cues. RPMs provide improved visibility in wet weather because with these devices, the visible or reflective element is raised above the level of water on the pavement surface (Lay 2009). Because of maintenance issues and costs associated with RPMs (Bahar et al 2004), transportation agencies have investigated alternative delineation devices and systems, including wet reflective pavement marking tape and barrier-mounted reflective delineators

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call