Assessing the rheological properties of bio modified asphalt cement

Abstract

The production of asphalt cement binder in Iraq is conducted through the distillation of crude oil. The byproduct of such distillation is the asphalt cement which does not practice any further processing further processing of the binder is considered vital to control its physical properties and chemical composition. The implementation of bio-modifiers before using such asphalt cement binder for paving work is a sound practice to enhance its sustainability and reserve the required rheological properties. In the present study, the asphalt cement binder was modified by implementation of extender oil (used diesel engine oil) and scrap tire rubber. The aim of this work is to improve and provide a sustainable and proper rheological quality of the binder for paving work. Various percentages of scrap tire rubber and extender oil have been tried to optimize the modifiers which can exhibit a suitable control on the required rheological properties of the asphalt binder such as the stiffness modulus, its temperature susceptibility in terms of penetration index and penetration viscosity number, and temperature of equivalent stiffness of the binder. The stiffness of asphalt cement binder was digested at hot, moderate, and cold environments. It was observed that the implementation of extender oil was able to reduce the penetration index (PI) by 36.3%, 54.5%, and 27.2% when 15%, 10%, and 5% of extender oil by weight of the mixture were added respectively to the control binder. The addition of scrap tire rubber to the binder-oil mixture was able to reduce the PI up to 10% of rubber content and exhibited further control of the temperature susceptibility of the binder. It can be revealed that the extender oil increases the negative values of penetration viscosity number (PVN) while the scrap tire rubber can improve the PVN of the binder. When high percentage of extender oil 15% is implemented, the stiffness of the binder declines by 50%, 90%, and 75% when the testing temperature change from 4 to 25, and 60 ℃ respectively. It was concluded that implication of 15% of scrap tire rubber and 15% of extender oil into the asphalt cement binder produced by Qayarah oil refinery is recommended to provide a sustainable binder for pavement, control its temperature susceptibility, and provide a binder with lower prone to pavement distresses.