Abstract
Due to the stable hysteretic behavior, buckling-restrained braces (BRB) have been increasingly adopted in reinforced concrete (RC) frame structures to develop a dual structural system. This investigation aims to quantify the seismic behavior of newly-constructed reinforced concrete BRB frames (RC-BRBFs). The force–deformation characteristic of dual RC-BRBFs is firstly presented and the yield displacement is derived using the story shear ratio resisted by BRB system. The seismic design procedure of dual systems for different BRB configurations (including single diagonal, V-type and inverted V-type), is developed using the performance-based plastic design approach by considering BRB postyield behavior, design target drift and global yield mechanism. 126 RC-BRBF structures corresponding to different story numbers, BRB configurations and story shear ratios are designed. The influence of story shear ratios on the design results is analyzed. The seismic response of structures subjected to 22 ground motions is investigated and compared in terms of yield mode, maximum interstory drift ratio, BRB maximum ductility and cumulative ductility, and residual drift ratio. The relationship between actual and design normalized story shear of BRBs is demonstrated and a fitting equation is proposed to quantify the actual story shear ratios. The analytical results of the present study can provide quantified insights to the seismic design of RC-BRBF structures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.