Abstract
ABSTRACTThis article describes an experiment carried out to evaluate discomfort glare of nonuniformly distributed light emitting diode (LED) sources. The glare sources were created with a 4 × 4 LED panel. Twenty participants evaluated 140 lighting conditions consisting of eight nonuniformity patterns, four to five levels of luminous intensity, two levels of background luminance, and two angles above the line of sight. Some clear trends were found: discomfort glare was greater when the light source was less uniform and with higher LED luminous intensity, darker background, or a smaller angle above the line of sight. The unified glare rating (UGR) model for small glare sources (UGRsmall) was tested using the experimental data. Although the UGR model had good correlation with visual results, it underestimated perceived glare. In addition, the degree of uniformity of the glare source was found to influence the performance of UGRsmall. As nonuniformity increases, the performance of UGRsmall decreases. Three modified versions of UGRsmall were derived, where each of the proposed models better predicts discomfort glare from nonuniform raw LED glare sources.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
