Abstract
This study reports – for the first time – a capillary electrophoretic method for the determination of fosfestrol, a synthetic estrogen used in the treatment of metastatic prostate cancer. The effects of the carrier ion concentration, injected volume and applied voltage were studied and optimized. A 10 mM sodium tetraborate solution was selected as the carrier electrolyte solution, while the sample was injected hydrodynamically by applying a 20 mmHg vacuum for 1 s. The driving voltage was 30 kV and the absorbance of the analyte (peak height) was monitored at 240 nm. Under the above-mentioned conditions, the migration time of fosfestrol was 6.6 min. Linearity was achieved in the analyte range 3–150 mg L −1 with the detection limit being 1 mg L −1. The proposed method is adequately precise ( s r = 2.8% at 100 mg L −1 fosfestrol, n = 10) without the use of an internal standard and was applied to the determination of fosfestrol in a pharmaceutical formulation. The results obtained by the proposed method were in good agreement with those derived from the USP reference method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.