Abstract

Summary In this paper, we present a case study for a comprehensive series of asphaltene flow assurance risk evaluations in the Arabian Gulf Carbonate Oil Field, where CO2 enhanced oil recovery (EOR) is recognized as one of the highest potential technologies for full-field implementation. At first, the sampling location was carefully selected considering the target reservoir’s features because the reliability of asphaltene studies highly depends on sample representativeness. After the quality assurance and quality control of collected samples, asphaltene onset pressures (AOPs) were measured at multiple temperatures under CO2 mixing conditions. The experimental design was optimized in terms of not only improving evaluation accuracy but also minimizing the experimental/sampling cost. The AOP measurements showed clear potential risks associated with CO2 injection. Subsequently, the numerical model analysis was conducted with the cubic-plus-association equation of state model to identify the risk area during CO2 injection. The analysis suggested that risk area is applicable to not only near-wellbore region at the sampling location but also tubing section/surface facility. Furthermore, risk level can be higher at the deeper location of the target reservoir. Finally, CO2-induced asphaltene formation damage risk was investigated from the viewpoints of precipitated asphaltene particle size and pore throat size in the porous media. As a result, the clogging risks from CO2-induced asphaltene were estimated to be high in the target reservoir. By virtue of the comprehensive risk evaluation, the asphaltene flow assurance risk associated with CO2 injection was identified field-wide. The findings from the evaluation encouraged us to move on to future actions, such as more detailed formation damage risk evaluation and mitigation plan development. The extended asphaltene risk evaluation covering the precipitation to deposition phenomena and the reverse engineering for sampling operations based on the experimental design made a worthy demonstration to reduce unnecessary cost and time while obtaining the key information to drive the project. The procedure in this work can contribute to establishing a subsurface part of a guideline for carbon capture, utilization, and storage (CCUS) from the viewpoint of asphaltene flow assurance risk evaluation.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call