Abstract

In this paper, we will highlight some of the impactful collaborative efforts completed within DeepStar Phase XII of the X200 Flow Assurance committees leading to the development, integration and deployment of novel technologies. This project aims to establish in what cases asphaltene deposition in reservoirs is a real problem. Flow reduction can occur in deepwater wells, which manifests as effective "skin" or high pressure drawdown required for fluid flow to be maintained. It is typically concluded, without additional evidence, that such problems are the result of asphaltene deposition. Some models for asphaltene deposition were developed between 1990 and 2005. However, the principal obstruction to validation of these models has been a credible core flow test to show increased flow restriction with depositing asphaltenes. At present, operators are unable to estimate the risk of development due to asphaltene deposition in reservoirs and the perceived flow impairment. To best assess the treatment frequency and effectiveness that is required for project development and execution, there is a need to be able to correctly predict the rate of formation damage in reservoirs from asphaltene deposition and develop effective remediation treatments. A successful project will provide test protocol, results, and analysis tools that can be applied to risk management evaluation for asphaltene fouling in reservoirs. Asphaltene precipitation and deposition in the production tubing and surface facilities is a well- documented issue and different methods are available to manage this problem. However, the problems that asphaltenes may cause in the reservoir, especially in the near-wellbore region, are much less understood. There is a lack of experimental capability to properly identify this problem and evaluate the corresponding potential strategies for prevention and/or remediation if/when needed. In addition, the available modeling tools to account for this problem have limited capabilities. Within this project, we aim to develop experimental procedures and modeling methods to establish whether impairment caused by asphaltene deposition in reservoirs is a real problem or not, and to develop an understanding of the mechanisms by which asphaltene precipitate, alter wettability and potentially deposit in the formation obstructing flow. A new experimental setup for Saturates, Aromatics, Resins, and Asphaltenes (SARA) characterization was designed and implemented in the lab to perform faster and more reliable analyses. Core flood experiments have been designed and successfully executed to induce the precipitation of asphaltenes inside the core upon addition of an asphaltene precipitant (e.g., n-pentane or n-heptane), which is crucial to obtain more meaningful and more representative experimental conditions. It has been observed that when n-pentane is used to precipitate asphaltenes, even though asphaltene aggregates are present in the system, the core flood test results do not show apparent damage to permeability. However, when asphaltenes are precipitated upon addition of n-heptane, aggregates have a more solid-like structure, which in turn have more tendency to block the pore throats. A microfluidic device was developed and used to visualize asphaltene deposition in porous media, at ambient pressure and different temperatures, flow rates, and driving force of asphaltene precipitation. The test results obtained from microfluidic device are in good agreement with the test results from the core flood experiments. A Computational Fluid Dynamic model based on Lattice-Boltzmann theory was developed to simulate asphaltene deposition inside porous media and is being validated for the capability to scale up lab results to field conditions.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.