Abstract
Printed circuit boards are considered a secondary source of raw materials, such as precious or base metals. One of the most promising solutions for recovering these metals is certainly hydrometallurgy. However, the leaching of different metals from PCBs is hindered by the presence of an organic fraction that lowers the extraction yields. One solution to this problem is a pyrolysis pre-treatment which removes the organic fraction and enhances it through conversion into syngas. A steady-state simulation model was developed using ASPEN PLUS to describe the thermodynamic behavior of PCB pyrolysis. The pyrolysis reactor was modeled as a combination of the Yields reactor and the Gibbs reactor. The model has been validated using various data present in the literature. The composition of the different products was estimated through the minimization of Gibbs’s free energy. A sensitivity analysis was performed to investigate the influence of different parameters on the conversion yield and the syngas quality produced. Thanks to the study, it was possible to describe and analyze the pyrolysis of PCBs without requiring numerous experimental tests. The results show how steam gasification appears to be the most efficient technology for the pre-treatment of PCBs within a hydrometallurgical process.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
