Ascent phase convective heat transfer of a stratospheric-balloon-borne payload

Abstract

Stratospheric ballooning flights are becoming more relevant due to these platforms can place payloads to an altitude above almost 99% of the atmosphere, where the environmental conditions are very similar to the space ones. From a thermal point of view, during the ascent phase convection is very relevant and, despite what a priori may be thought, depending on the element considered, convection may not be negligible at the float phase. With this in mind, the Thermal Analysis Support and Environment Characterization Laboratory (TASEC-Lab) was born. It is an experiment based on COTS, which consists in a 3U CubeSat-like experiment, which was launched onboard a stratospheric balloon in León (Spain) on 16th, July 2021. The upper unit of the 3U box contains a heated plate, with the aim of quantifying the relevance of convection during the flight. In this paper, the relevance of convection during the ascent phase is described, the correlation of in-flight temperature measurements with those provided by the thermal mathematical model developed in ESATAN-TMS is performed, using the air mass flow inside the cavity as a fitting parameter with a fitting error lower than 5 °C during the ascent phase.