Artificially integrated synthetic rectangular waveguide

Abstract

A synthetic rectangular waveguide (SRW), which consists of two electrical sidewalls and two parallel periodical structures placed at the top and bottom surfaces of the waveguide, is presented. The SRW is made by multilayered integrated circuit processes, which typically have large ratios of SRW lateral dimensions to substrate thickness. Two theoretical methods, finite-element method and deembedding of composite structure consisting of SRW and mode converters, are applied to investigate the propagation characteristics of the SRW. Application of the dispersion characteristics of the two-dimensional periodical structures coupled with appropriate mode converter designs leads to results in SRW designs supporting TE/sub 10/, TM/sub 00/, and TM/sub 10/ modes. Measurements and the two theoretical approaches indicate that the slow-wave factor is 4.9 and Q-factor is 260 at 6.85 GHz for the TE/sub 10/ mode propagation with a cutoff frequency of 4.10 GHz (0.348 factor of cutoff frequency of conventional rectangular waveguide using the same material and dimensions). The theoretical data show the TM/sub 00/ mode to have a slow-wave factor of 1.8, Q-factor of 187.6 at 11.4 GHz, and cutoff frequency of 10.2 GHz. The TM/sub 10/ mode has a slow-wave factor of 1.98, Q-factor of 187.6 at 12.5 GHz, and cutoff frequency of 10.4 GHz.